Filter
Top Products
10
TROUBLESHOOTING
10
- 1
9
XML MESSAGE
FORMAT
10
TROUBLESHOOTINGAPPENDICESINDEX
CHAPTER 10 TROUBLESHOOTING
The following flowchart shows the troubleshooting procedure for errors that might occur
during operation of the MES interface module.
Figure 10.1 Troubleshooting flowchart for operation of the MES interface module
Start
Is the RUN LED ON?
Yes
Identify the error and take corrective actions.
No
According to each of the following, identify the error
and take corrective actions.
Is the ERR. LED ON
or flashing?
No
Yes
By the error code, identify the error and take corrective
actions.
Is the MES interface
function working?
Yes
No
Activate the MES interface function.
Is the job enabled?
Yes
No
Enable the job.
Is there any problem on
the server computer?
Yes
No
Check the log output to the server computer, identify
the error and take corrective actions.
Is there an error code in
the response message returned by the
XML processing function?
Yes
No
By the error code, identify the error and take corrective
actions.
Section 10.3.3 (1) Troubleshooting about LED
indication and I/O signals
• Section 10.1 Error Codes
• Section 10.2 Error Code List
• Section 7.13.1 Checking the operation status of
the MES interface function
• Section 7.13.2 Manipulating the operation
status of the MES interface function
• Chapter 9 XML MESSAGE FORMAT
• Section 10.2 Error Code List
• Section 10.1 Error Codes
• Section 10.2 Error Code List
• Section 7.13.4 Changing the job status
• Chapter 9 XML MESSAGE FORMAT
• Section 10.3.3 (1) Troubleshooting about LED indication and I/O signals
• Section 10.3.3 (2) Troubleshooting about network connection
• Section 10.3.3 (3) Troubleshooting about communication between the MES interface module and
access target CPU
• Section 10.3.3 (4) Troubleshooting about the DB interface function
• Section 10.3.3 (5) Troubleshooting about the XML processing function
• Section 10.3.3 (6) Troubleshooting about the time synchronization function