Filter
Top Products
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.8 Device Tag Setting
7.8.1 Setting items in Device Tag setting
7
- 39
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND
PROCEDURE TO
OPERATION
5
INSTALLATION AND
UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE
FUNCTION
CONFIGURATION TOOL
8
DB CONNECTION
SERVICE AND
SETTING TOOL
7.8.1 Setting items in Device Tag setting
Up to 64 items can be set in [Device tag settings] within one project.
Figure 7.30 [Device tag settings]
Table 7.37 Setting items in [Device tag settings]
Item Description
Device tag name Enter a device tag name. (Up to 16 characters)
Sampling settings
Set whether to collect tag data at regular intervals or not.
When collecting, set a sampling interval.
Also, set whether to make the sampling more efficient or not.
Prohibit data writing Enable or disable writing data to the tag.
Array setting
Set whether to use arrays for the tag or not.
Section 7.8.2 Setting items in Array setting
Component setting input
Configure the tag component settings.
Section 7.8.3 Setting items in Component setting
Component List
Displays a list of the components that have been already set.
Section 7.8.3 Setting items in Component setting
Array block size
Make setting when changing the block size manually.
Section 7.8.3 Setting items in Component setting
No. of tag components in
project
Displays the number of all the tag components in the project.
No. of statistical
processings in project
Displays the number of the components in the project, for which [Perform
statistical processing] is selected.
No. of device points in tag Displays the number of total device points used in [Device Tag setting].