Filter
Top Products
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.7 Access Target CPU Setting
7.7.1 Setting items in Access target CPU setting
7
- 35
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND
PROCEDURE TO
OPERATION
5
INSTALLATION AND
UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE
FUNCTION
CONFIGURATION TOOL
8
DB CONNECTION
SERVICE AND
SETTING TOOL
(2) PLC series (QCPU (Q mode)/RCPU, QCPU (A mode), LCPU, QnACPU,
ACPU)
Select the PLC series of the access target CPU.
Select the QCPU (Q mode)/RCPU when accessing a C Controller module.
(3) Multiple CPU specification (No specification, No.1 to No.4)
Select a CPU No. when the access target CPU is used in the multiple CPU system.
When "No specification" is selected, access is made to the control CPU.
(4) Other station specification
Select whether or not to specify any other station. For details on accessible routes,
refer to the following:
Section 3.2 (2) Accessible routes
(a) No specification
Select this when accessing the CPU on the host station.
(b) Other station (Single network)
To access a CPU module on another station over the following network(s), specify
a single network.
1) Using any one of the following networks:
• CC-Link IE Controller Network
• MELSECNET/10
• MELSECNET/H
• CC-Link
• Ethernet
•C24
• CC-Link IE Field Network
2) Using more than one networks from the following:
• CC-Link IE Controller Network
• MELSECNET/10
• MELSECNET/H
• Ethernet
• CC-Link IE Field Network
Access to a CPU module on another station over CC-Link IE Field
Network only
Access from a MELSECNET/H network to a CPU module on another
station over CC-Link IE Field Network
Ex.
Ex.