Filter
Top Products
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.11 Job Setting - Actions
7.11.2 Setting items in Communication action (Select/Update/Insert/MultiSelect/Delete)
7
- 113
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND
PROCEDURE TO
OPERATION
5
INSTALLATION AND
UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE
FUNCTION
CONFIGURATION TOOL
8
DB CONNECTION
SERVICE AND
SETTING TOOL
3) Continue this job/Finish this job
• When [Continue this job] is selected.
After executions of exception processing described in the above 1) and 2),
the system continues executions of other actions.
• When [Finish this job] is selected
After executions of exception processing described in the above 1) and 2),
the system forcibly terminates the job without executing other actions.
At this time, update/insert/delete values before execution of the exception
processing are committed, and they are written to relevant tag
components.
(1) When a job is forcibly terminated due to exception processing, an error
occurred during job execution (job cancellation) is not notified.
Section 7.10.5 Setting items for job cancellation
(2) If [Enable DB buffering] is selected for a job, its exception process setting is
disabled.
Section 7.10.4 Setting items in DB Buffering
Table 7.78 Values available for substitution
Data type of tag
component
Values available for substitution
Bit type ON/OFF is selectable.
Single-precision type
Double-precision type
Floating-point type
Up to 16 characters
• Signed decimal notation (Example: -521.98)
• Signed exponential notation (Example: -5.2198E03)
16-bit BCD type Unsigned 16-bit BCD notation 0 to 9999 (Example: 1234)
32-bit BCD type Unsigned 32-bit BCD notation 0 to 99999999 (Example: 12345678)
String
Up to 32 characters
For characters that can be used for strings, refer to the following.
Appendix 2.3 Characters available for character string constants,
etc.