Filter
Top Products
4
SETTINGS AND PROCEDURE TO OPERATION
4.7 CompactFlash Card
4.7.2 Installation/removing the CompactFlash card
4
- 17
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND
PROCEDURE TO
OPERATION
5
INSTALLATION AND
UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE
FUNCTION
CONFIGURATION TOOL
8
DB CONNECTION
SERVICE AND
SETTING TOOL
(1) Stopping file access
1 Stop file access.
• Turn the File access stop request (Y2) ON from OFF.
2 Check the file access stop by the following:
• Check the CompactFlash card status (X1) is OFF.
• Check the File access status (X2) is ON.
• Turn the File access stop request (Y2) OFF from ON.
(2) Installation of the CompactFlash card
1 Open the LED cover on the front of the MES interface module, then remove the
CompactFlash card slot cover.
• Put the finger at the bottom of the LED cover that is on the front of the MES
interface module, and lift the LED cover to open.
• Put the finger at the top of the CompactFlash card slot cover and then
remove the cover.
Figure 4.13 File access stop processing
Figure 4.14 CompactFlash card slot cover removal
File access status (X2)
CompactFlash card status (X1)
(In operation)
(During stop)
File access stop request (Y2)
1)
2)