Filter
Top Products
APPENDICES
Appendix 3 Setting Information File Format (CSV File Format)
Appendix 3.7 CPU.CSV
App
- 23
9
XML MESSAGE
FORMAT
10
TROUBLESHOOTINGAPPENDICESINDEX
*1 For characters can be used in CPU names, refer to the following. For characters that can be used
for describing the name, refer to the following.
Appendix 2.2 Characters that can be used for item names, component names, variable names,
etc. in the product
*2 If the same CPU name already exists, the existing name is overwritten.
If the same CPU name is set multiple times, the setting of the label with the higher number is
overwritten.
*3 If the series other than [QCPU] is selected for SERIES, [NO] cannot be selected.
If selected, an error occurs.
*4 Some restrictions apply to the setting values of NET1 and NET2 depending on the combination
(refer to the table below).
If a value is set without following the restrictions, an error occurs.
*5 "QCPU" is displayed even when using C Controller module or RCPU.
Table App.22 Setting values of NET1 and NET2
SERIES
OTHER
STATION
NET1 NET2
QCPU
SINGLE There is no restriction. -
DIFFERENT There is no restriction.
1) When [NET10], [ETHERNET], or
[CCIEFIELD] is set to NET1, [NET10],
[ETHERNET], or [CCIEFIELD] cannot
be set.
2)
When [CCLINK] or [C24] is set to
NET1, [CCLINK] or [C24] cannot be
set.
QCPUA
SINGLE
[ETHERNET], [C24], and
[CCIEFIELD] cannot be set.
-
DIFFERENT [CCLINK] and [C24] cannot be set.
The following values cannot be set.
• [NET10]
• [ETHERNET]
•[CCIEFIELD]
• [C24]
LCPU
SINGLE [NET10] cannot be set. -
DIFFERENT There is no restriction.
1)
The following values cannot be set.
• [NET10]
When [NET10], [ETHERNET], or
[CCIEFIELD] is set to NET1,
[CCIEFIELD] cannot be set.
When [CCLINK] or [C24] is set to
NET1, [CCLINK] or [C24] cannot be
set.
2)
3)
QNACPU
SINGLE [CCIEFIELD] cannot be set. -
DIFFERENT [CCLINK] and [C24] cannot be set.
The following values cannot be set.
• [NET10]
• [ETHERNET]
•[CCIEFIELD]
• [C24]
ACPU
SINGLE
[ETHERNET], [C24], and
[CCIEFIELD] cannot be set.
-
DIFFERENT [CCLINK] and [C24] cannot be set.
The following values cannot be set.
• [NET10]
• [ETHERNET]
•[CCIEFIELD]
• [C24]