Filter
Top Products
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.10 Job Setting
7.10.1 Setting items in Job setting
7
- 59
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND
PROCEDURE TO
OPERATION
5
INSTALLATION AND
UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE
FUNCTION
CONFIGURATION TOOL
8
DB CONNECTION
SERVICE AND
SETTING TOOL
7.10.1 Setting items in Job setting
Up to 64 items can be set in [Job settings] within one project.
For job operations, refer to the following:
Section 6.1.11 (1) Operation behavior of jobs
Figure 7.43 [Job settings]
Table 7.46 Setting items in [Job settings]
Item Description
Job name Enter a job name. (Up to 16 characters)
Enable at module startup Set whether to enable the job at startup of the MES interface module or not.
Trigger buffering Set whether to enable the trigger buffering or not.
Startup logging Set whether to output the startup history of the job to the log or not.
Test mode Set whether to operate the job in test mode or not.
Trigger conditions
Configure the settings for startup conditions of the job.
Section 7.10.2 Setting items in Trigger conditions
Actions
Configure the action settings.
Section 7.11 Job Setting - Actions
Program execution
Configure the settings for the program execution function.
Section 7.10.3 Setting items in Program execution
DB Buffering
Set whether to utilize the DB buffering function or not.
Section 7.10.4 Setting items in DB Buffering
Notify errors (job
cancellation) that occur
during job execution
Set whether to enable or disable notification of errors (job cancellation) that
occur during job execution.
Section 7.10.5 Setting items for job cancellation
No. of fields in project Displays the total number of fields in the project.
No. of fields in job Displays the total number of fields used in [Job settings].
Tag component data length
in job
Displays the total data length of the tag components in the job.