Filter
Top Products
7
- 12
7.4 Project File Handling
7.4.4 Importing a project
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(1) Selecting an item to be imported
In the tree, select the item to be imported.
*1 When the setting type shown below is selected, items under any other setting type are
automatically selected if they are used for the selected one.
Note that, if an item of the same name exists in the target project, the item is not automatically
selected.
The user must select items to be imported.
(2) Import precautions
There is a limit on the number of settings for each setting type in a project.
Check [Existing registration information] and [Import information], and select items of
each setting type to be imported so that each limit is not exceeded.
*2 If an item of the same name exists, it is overwritten and therefore, excluded from the restriction on
the number of settings for each setting type.
Table 7.10 Item to be imported
Checked item Item to be imported
Project root All items in the project
Setting type
*1
All items under the setting type whose checkbox is checked
Item Each item whose checkbox is checked
Table 7.11 Automatically selected item
Setting type Automatically selected item
[Device tag settings] [Access target CPU settings]
[Job settings] [Device tag settings], [Server service settings]
Table 7.12 Number of settings available for each setting type
Setting type
Allowable number of settings
*2
[Access target CPU settings] 64
[Device tag settings] 64
[Server service settings] 32
[Job settings] 64