Filter
Top Products
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.13 Online - Remote operation
7.13.7 Checking the operation status of the trigger buffering
7
- 143
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND
PROCEDURE TO
OPERATION
5
INSTALLATION AND
UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE
FUNCTION
CONFIGURATION TOOL
8
DB CONNECTION
SERVICE AND
SETTING TOOL
7.13.7 Checking the operation status of the trigger buffering
The current and past maximum values of No. of trigger buffering data can be viewed.
*1 The space is displayed as blank during data acquisition or in the case of failure of data acquisition.
When the number of buffering data is large, check the number of jobs and the
trigger condition setting.
1
7.13.8 Formatting the CompactFlash card
Format the CompactFlash card installed in the MES interface module.
1 Check the [Format] box and click the button.
2 Executing the formatting deletes all of the CompactFlash card data.
When the CompactFlash card is formatted after the system operation, the MES
interface function settings are cleared.
Read out the MES interface function settings to MES Interface Function
Configuration Tool before formatting the card.
Section 7.12.3 Reading the MES interface function settings
Figure 7.112 [Trigger buffering status]
Table 7.98 Item displayed in [Trigger buffering status]
Display
Description
Now Maximum
No. of bufferings
*1
Displays the current number of
buffering data (buffered jobs).
Displays a past maximum value in the
number of buffering data (buffered
jobs).
Figure 7.113 [CompactFlash card operation]
Execute