Filter
Top Products
3
SPECIFICATIONS
3.2 Accessible Devices and Ranges
3
- 9
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND
PROCEDURE TO
OPERATION
5
INSTALLATION AND
UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE
FUNCTION
CONFIGURATION TOOL
8
DB CONNECTION
SERVICE AND
SETTING TOOL
: Accessible ×: Inaccessible
*1 For the network No. and station number, set the values same with the parameter settings of the Q
series E71, QE71, L series E71 and R series E71 on access target CPU side.
Also, set [Station No. IP information] in the parameter settings of the Q series E71, QE71, L series
E71 and R series E71.
For the [Station No. IP information], specify the IP address computation method, table conversion
method, or both.
*2 For the CC-Link system master/local module on the access target CPU side, use modules of
software version "S" or later.
*3 Use a MES interface module whose serial No. (first five digits) is "13092" or later.
*4 Use Universal model QCPU whose serial No. (first five digits) is "12012" or later.
*5 When a C Controller module is used as a control CPU of the access target network module, the
accessible CPU module is only the control CPU.
*6 Use QCPU (Q mode) or RCPU as a control CPU of the access target network module.
*7 Use an Ethernet module to access a programmable controller CPU over Ethernet.
With the built-in Ethernet port of a programmable controller CPU, a programmable controller CPU
cannot be accessed.
Figure 3.6 Access to the programmable controller CPU over Ethernet
*8 When the access target CPU is Q12DCCPU-V, the access is not possible.
*9 Use a MES interface module whose serial No. (first five digits) is "15102" or later.
*10 Use a MES interface module whose serial No. (first five digits) is "16072" or later.
*11 When the Network communication route is NET/10(H), the access is not possible.
Table 3.7 Different network
Network
communication route
Co-existence
network route
Access target CPU (PLC series)
QCPU
(Q mode)
*6
RCPU
*10
LCPU QnACPU
QCPU (A mode),
ACPU
C Controller
module
CC-Link, C24
CC IE Control,
NET/10(H)
*11
×× ×
*5
Ethernet
*7 *1 *1 *1*9
×× ×
CC IE Field
*3 *4
××
*8
Programmable
controller CPU
Ethernet
module
Ethernet Ethernet
MES
interface
module
Ethernet
module
Programmable
controller CPU
MES
interface
module
Ethernet
module
Example of accessible
module configuration
Example of inaccessible
module configuration