8
DB CONNECTION SERVICE AND SETTING TOOL
8.5 Setting Items of DB Connection Service Setting Tool
8
- 18
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND
PROCEDURE TO
OPERATION
5
INSTALLATION AND
UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE
FUNCTION
CONFIGURATION TOOL
8
DB CONNECTION
SERVICE AND
SETTING TOOL
(3) Limit IP addresses permit to connect
(a) Specify whether or not to set the IP addresses permitted to connect.
By checking the [Limit IP addresses permit to connect] box, connection is only
permitted from the MES interface module or the configuration computer with the
set IP address.
At least one IP address setting is required for this and up to 64 IP addresses can
be set.
When not checking the box, connection is permitted from any MES interface
module or the configuration computer.
(b) When selecting [Limit IP addresses permit to connect], set the IP addresses with
connection permission.
1) Adding an IP address with connection permission
1 Set the following items, then click the button.
2 The IP address is added to the [Permitted IP addresses list].
(Example) 192.168.0.64
3 Set the following items, then click the button.
4 The IP address/mask bit length is added to the [Permitted IP addresses list].
(Example) 192.168.0.64/26
Table 8.4 Setting items when [Limit IP addresses permit to connect] is selected
Item Description
IP address Set IP addresses permitted to connect in decimal notation.
Mask bit length (Blank)
Table 8.5 Setting items when [Limit IP addresses permit to connect] is selected
Item Description
IP address Set IP addresses permitted to connect in decimal notation.
Mask bit length
Set the enabled bit length of the set IP address.
(Range: 1 to 32)
Add
Add
