Filter
Top Products
Monitoring the ReadiVoice System
Proprietary & Confidential 81
Figure 3-11 Results of generating statistics for all operators
Using the SNMP Monitor
The ReadiVoice system supports the Simple Network Management Protocol
(SNMP). SNMP lets you monitor the ReadiVoice system with standard
network administration tools, such as HP Openview from Hewlett Packard or
similar tools from companies such as SUN or IBM.
documents the system and bridge SNMP events. “Enabling SNMP Logging”
on page 141 describes SNMP logging, which writes SNMP data to log files on
an ongoing basis.
But, if you just want to check system statistics in real time, you can use SNMP
Monitor. SNMP Monitor is a Java applet that you run from your browser. It
provides a quick and convenient way to monitor the contents of the SNMP
Management Information Base (MIB).
To run SNMP Monitor:
1 On the ReadiVoice home page, click the SNMP Monitor link.
The Java applet loads, which may take a few moments. Then, the SNMP
Monitor window appears. The Perfmeter tab is selected, and it starts
graphing selected MIB data over time, both system-level and for each
individual bridge. See Figure 3-12.
Although the SNMP Monitor applet opens in its own window, your
browser must remain active and pointed to the Monitor host page. If you
close your browser or navigate away from the host page, SNMP Monitor
closes.