Filter
Top Products
Administering the ReadiVoice System
Proprietary & Confidential 21
4 To save your changes, click the Commit button (blue “c”).
The system confirms that the bridge has been modified and provides a link
back to the Bridges page.
To change a bridge’s translation numbers, follow the procedure in “Changing
the Translation Numbers Assigned to a Bridge” on page 24.
Deleting a Bridge
Before deleting a bridge, remove its translation number assignments. Then
remove the bridge from any bridge groups to which it belongs.
To remove a bridge from the ReadiVoice application:
1 In the navigation bar, click Bridges.
The Bridges page appears (Figure 2-3 on page 20).
2 Find the bridge you want to delete and click its Delete button (red “–”).
If the bridge has IP addresses or translation numbers associated with it or
belongs to a bridge group, the system warns you of this and doesn’t delete
the bridge. Otherwise, it confirms deleting the bridge.
Caution!
The value in the Bridge ID field must be unique and must correspond to the bridge’s
appBridgeID value in the vbootp.db file. If the bridge was properly configured in
VBootP, its Bridge ID was set correctly when it was added to the ReadiVoice
database, and it shouldn’t be changed.