Filter
Top Products
Diagnostics and Troubleshooting
Proprietary & Confidential 151
6 Enter the logical number of the first card you want to test (card
numbering begins with zero).
You see:
7 Enter the logical number of the last card you want to test. To test only the
card you entered in step 6, enter the same number again.
If this is an IP system, The script displays a blank line, and your phone
rings. Skip to step 12.
If this is a PSTN system, you see:
8 Choose one of these options:
— To test both spans on the selected card or cards, enter
1
. Then skip to
step 10.
— To test a single span, enter
2
.
You see:
9 Enter the number of the span you want to test (
0
or
1
).
You see:
10 Choose between these options:
— To test all channels on the span, enter
1
. Then skip to step 12.
— To test a single channel, enter
2
.
You see:
11 Enter the number of the channel you want to test.
The script displays a blank line, and your phone rings.
Enter Range of Cards:
To:
Press -1- To Test All Spans On A Board Or -2- For Individual
Enter the Span Port Number:
Press -1- To Test All Channels On A Span Or -2- For A Particular
Channel:
Enter the Channel: