Filter
Top Products
ReadiVoice Administration & Maintenance Guide
60 Proprietary & Confidential
Setting Up the Provisioning Interface
After working with the subscriber group settings, you may realize that your
company doesn’t need or want to use all the available fields when
provisioning subscribers or modifying their accounts.
You can customize the Provisioning interface so that provisioners see only the
fields you want them to use. You can also change the field names to match
your company’s usage.
The Quick Provisioning Setup page (Figure 2-21 and Figure 2-22) lets you
decide what appears on the Add Subscriber and Edit Subscriber pages. You
can:
• Hide fields and settings that your company doesn’t need.
A few fields are required by the system. They don’t have check boxes by
them, so you can’t turn them off (but you can rename them). You probably
want to require at least some subscriber and billing information.
Other fields may be necessary because of your system configuration (such
as Subscriber External ID) or to implement certain features (such as Dial
Out Prefix and Dial Out Postfix).
• Change the names of fields and settings.
When renaming fields and settings, keep in mind that space is limited.
Check your changes to make sure they display properly.
If you rename fields and settings that apply to subscriber groups, those
changes also appear on the Edit Group page.
To customize what appears in the Provisioning interface:
1 In the System Administration navigation bar, click Quick Provisioning
Setup.
The Quick Provisioning Setup page appears.
2 To disable a field or setting (removing it from the Provisioning interface),
click its check box to clear it. To re-enable a field or setting, click its check
box again to select it.
3 To change how a field or setting is labeled in the Provisioning interface,
edit the name shown in its text box.
Caution!
Some ReadiVoice system configurations may require that certain fields and settings
be available in Provisioning even though the Quick Provisioning Setup page allows
you to leave them out. Be sure you know which fields are needed for your system
configuration.