Filter
Top Products
Administering the ReadiVoice System
Proprietary & Confidential 47
The following sections describe how to create, edit, and delete a group. For
information about adding subscribers to a group, see the ReadiVoice
Provisioning Guide.
Adding a New Subscriber Group
Every subscriber group must be associated with a number group, which
controls the access numbers available to the subscriber group. If you want to
link the new subscriber group with its own number group, create the number
group first. See “Working with Number Groups” on page 30.
To add a new subscriber group:
1 In the System Administration navigation bar, click Subscriber Groups.
The Subscriber Group page appears (Figure 2-16). The List panel shows
the subscriber groups that exist.
2 In the Add panel, select an existing group from which to copy the initial
values and enter a name for the new group. The maximum length is 50
characters.
3 Click the Add New Group button.
The system creates the new group, copying its initial values from the
existing group you selected, and opens the Edit Group page (Figure 2-17).
4 Edit the group information as described in “Editing a Subscriber Group,”
starting at 3.
Repeat the above procedure to add another subscriber group.
Figure 2-16 Subscriber Group page