Filter
Top Products
ReadiVoice Administration & Maintenance Guide
58 Proprietary & Confidential
9 Click Commit Group.
The system either confirms that the group has been updated or tells you
which information is missing.
10 If the update failed, note what’s missing. Then click the link to return to
the Edit Group page, make the needed corrections, and click Commit
Group again.
Repeat the above procedure to edit another subscriber group.
How Continuation Settings Interact
Table 2-8 shows how Auto Continuation and Conference Continuation
interact to determine an account’s continuation behavior (whether a
conference continues after the subscriber leaves) and what control the
subscriber has over that behavior.
Table 2-8 Continuation settings at a glance
Auto Continuation
Conference
Continuation Effect Setting
Subscriber
Configurable
On
Yes
Yes Continuation on. Subscriber can turn it off for the
current conference or for all future conferences.
No
Continuation on. Subscriber can turn it off for all future
conferences, but not for the conference currently under
way.
No
Yes
Continuation on. Subscriber can turn it off for the
conference currently under way, but not for all future
conferences.
No
Continuation on. Subscriber can’t turn it off at all. All of
the subscriber’s conferences are set to continue until
the last participant disconnects.
Off
Yes
Yes
Continuation off. Subscriber can turn it on for the
conference currently under way or for all future
conferences.
No
Continuation off. Subscriber can turn it on for all future
conferences, but not for the conference currently under
way.
No
Yes
Continuation off. Subscriber can turn it on for the
conference currently under way, but not for all future
conferences.
No
Continuation off. Subscriber can’t turn it on at all. All of
the subscriber’s conferences are set to end when the
subscriber disconnects.