Filter
Top Products
Maintaining the ReadiVoice System
Proprietary & Confidential 97
Daily Maintenance Tasks
This section describes tasks you should perform daily, assuming that you
archive nightly and back up logical logs to tape. Perform them first thing in the
morning or any time after the archive process is complete.
Stopping Logical Log Backup and Replacing Tapes
1 In the XTerm window running
ontape -c
, press CTRL+C.
The logical log backup process stops.
Leave this XTerm window open (or running minimized) so that later you
can restart logical log backup in it. See “Restarting Backup and Verifying
Tape Drive Status” on page 102.
2 Eject and replace the archive tape and, if necessary, the logical log tape.
Checking the ReadiVoice Processes
The ReadiVoice processes are:
odproc
— main ReadiVoice CACS process
csc
— conference state controller
megasock
— manages communications
mplex
— runs Operator application
sockcap
— captures and records log files
instore
— collects and stores health and status information
vbootp
— bootstraps the cards in a bridge
sua
— call control (IP systems only)
Caution!
Never try to unload a tape cartridge while the tape is in motion as indicated by the
LED. Doing so can permanently damage the tape.
Caution!
ReadiVoice behavior is unpredictable unless all required processes are running.