Filter
Top Products
ReadiVoice Administration & Maintenance Guide
52 Proprietary & Confidential
6 In the Conference Options section (Figure 2-20), configure Account
Options and Roll Call Options. Each of the features has two settings:
Setting — Determines the feature’s default setting.
Subscriber Configurable — Determines whether subscribers can change
their account’s default setting later, using either the account options call
flow menu (if enabled) or the Moderator.
Table 2-7 on page 54 describes the settings. Remember, the group’s
settings are the initial settings for subscribers in the group, but
provisioners can modify them for specific subscribers.
7 Continue with the Conference Options section by setting the
Provisioning Options. See Table 2-7.
Table 2-6 Call Flow and Voice Prompt fields and settings
Field/Setting
a
a. These are the default labels. All field labels that also appear on the New Subscriber page can be customized.
Description
Prompt for Menu Specifies whether subscribers can access the account options menu
when they dial into the system and identify themselves.
On — Subscribers in this group are given the opportunity to change the
account options. The account options menu enables subscribers to
make changes that affect all future conferences (including the one that a
subscriber is in the process of starting).
Off — Subscribers are not given the opportunity to access the account
options menu (but can still modify account options through the
Moderator interface).
Prompt for Subscriber Indicates whether the call flow includes a prompt for the subscriber to
enter his or her subscriber password.
On — Callers hear “If you are the subscriber, press star” (this is the
default wording). Use this setting unless all subscribers in this group
must have a two-password (shared or private) call flow.
Off — Callers hear “At any time during this message, please enter your
passcode followed by the pound key.” Use this setting if only
two-password call flows are possible.
If this is set to Off for a subscriber account with a traditional (one
password) call flow, the subscriber has no opportunity to identify him or
herself when dialing in and must use the Moderator to start conferences.
Prompt for Security Specifies the setting for the conference security code prompt.
No Prompt — The conference security feature isn’t available.
Optional Prompt — Subscribers are given the option of setting up a
conference security code, which participants must know in order to join
the conference.
Mandatory Prompt — Subscribers are required to set up a conference
security passcode.
Prompt Set Specifies the voice prompt set for this subscriber group’s conferences.