ReadiVoice Administration & Maintenance Guide
56 Proprietary & Confidential
Conference
Continuation
Determines whether subscribers can override their accounts’ default
continuation behavior (specified by the Auto Continuation settings) for
a specific conference during that conference (using either a touchtone
command or the Moderator interface).
Yes — Subscribers can turn continuation on or off during their
conferences. Doing so doesn’t change the default (Auto Continuation)
setting for the account; only the current conference is affected.
No — Subscribers can’t override the default continuation behavior
during their conferences. Once a conference has started, the account’s
Auto Continuation setting controls the continuation behavior.
If Conference Continuation is No and Auto Continuation isn’t
subscriber configurable, then the subscriber can neither change the
default behavior nor override it; the Auto Continuation Setting (On or
Off) governs all the subscriber’s conferences. See “How Continuation
Settings Interact” on page 58.
Dial Out Permission Determines whether a subscriber can dial out from his or her
conferences.
Dial Out Prefix Appears only if your system is configured for dial-out billing (see
“Configuring Dial-Out Billing” on page 126). Enables billing for dial-out
calls a subscriber makes. This field and Dial Out Postfix together can’t
exceed 24 characters.
This field has no effect if Dial Out Permission is set to No.
Dial Out Postfix Appears only if your system is configured for dial-out billing. Enables
billing for dial-out calls the subscriber makes. This field and Dial Out
Prefix together can’t exceed 24 characters.
This field has no effect if Dial Out Permission is set to No.
Recorder Dial Out Determines whether a subscriber can choose to record a conference.
Conference recording is available only if your system is configured
properly and can dial out to a recording service or device. See “Enabling
Conference Recording” on page 137 and ask your Polycom Global
Services representative about conference recording.
VIP Conference On
— Subscribers in this group have VIP Conference turned on by
default. VIP Conference subscribers are guaranteed access to the
number of ports specified in their subscriptions.
Polycom recommends selecting Off for this option. It’s best to grant VIP
status only to individual subscribers and only in limited numbers. VIP
subscribers have exclusive use of their ports at all times, permanently
removing those ports from the pool of available ports for non-VIP
conferences. Overuse of the VIP Conference option has a negative
impact on your system’s port utilization efficiency.
Off — Subscribers in this group have VIP Conference turned off by
default. This is the normal setting. Non-VIP subscribers’ ports come
from the general pool, and the full number specified in their
subscriptions is not guaranteed to be available at all times.
Table 2-7 Conference Options (continued)
Field
a
Description