Filter
Top Products
Administering the ReadiVoice System
Proprietary & Confidential 59
If they may do so, subscribers can change the continuation behavior of all
future conferences in two ways:
• By accessing the account options menu when dialing into the system
(available if Prompt for Menu is turned on).
• By logging into the Moderator and accessing its account options settings.
If they may do so, subscribers can change the continuation behavior of the
conference currently under way by entering the correct touchtone command
(the default is
*8
).
Deleting a Subscriber Group
You can’t delete a group that has active subscribers. First, you must change the
subscribers to a different group. For instructions, see the ReadiVoice
Provisioning Guide. You can’t delete the last remaining subscriber group.
To delete a subscriber group:
1 In the navigation bar, click Subscriber Groups.
The Subscriber Group page appears (Figure 2-16 on page 47).
2 Find the group you want to delete and click its Delete button (red “–”).
A dialog box asks you to confirm deleting the group.
3 Click OK.
The system confirms that the group has been deleted.
Repeat the above procedure to delete another subscriber group.
Caution!
Be sure you want to permanently remove all information about a group before you
delete it.