Filter
Top Products
Customizing & Branding Your ReadiVoice System
Proprietary & Confidential 163
The default prompt set installed with the ReadiVoice system contains six
.wav
files with spoken messages designed to work with these commands:
global_muted.wav
global_unmuted.wav
private_muted.wav
private_unmuted.wav
wr_notification_off.wav
wr_notification_on.wav
For more information about these files, their default contents, and how to
customize them, see Appendix A.
Customizing the Moderator Interface
By default, the ReadiVoice Moderator displays a Polycom logo image file on
both the login/logout page and the Moderator interface page. You can
customize the Moderator in two ways:
• Replace the Polycom logo image file to brand both the login/logout page
and the Moderator interface page with your company logo.
• Install additional image files to customize the Moderator interface page
for specific subscriber groups.
Branding the Moderator with Your Company Logo
The default image file is the image file used for everyone except the subscriber
groups that you customize.
The default image file is:
Its size is 35x146 pixels (HxW).
In order to install a new image file, you must be logged into the CACS server
as root.
To replace the existing (Polycom logo) image file with your own company’s
default image file:
1 Create the replacement image file you want to use as the default file.
This procedure is simplest if the replacement image is a
.png
file of the
same or similar size. But, you can use a
.gif
or
.jpg
file. Other file formats
are also possible (such as
.swf
), but may impose browser limitations or
require plug-ins. If your replacement differs in size from the one we
provide, be sure to test it to ensure that the appearance is acceptable.
/rahome/ns-home/docs/HTMLMOD/default/images/moderator/corporate_logo.png