Filter
Top Products
ReadiVoice Administration & Maintenance Guide
122 Proprietary & Confidential
— Routed System: The Traditional Shared, Traditional Private, and
Two Passcode Private call flow options are available. Voyant has
tested and supports only the combinations shown in Table 5-3.
6 Select Yes or No for the Validate on Acc Code option. This option isn’t
available if Routing Mode is Non-Routed System Private.
— Yes: The ReadiVoice system identifies a caller’s conference using the
access code only.
—No: The ReadiVoice system identifies a caller’s conference using the
DNIS/access code pair.
7 To implement your changes, click Commit Configuration.
The system confirms your changes and provides a link back to the System
Configuration page. If necessary, a note reminds you that you must
restart the application.
8 Click the link to return to the System Configuration page and verify that
the settings are correct.
9 If you changed any of the routing or call flow options, you must run the
tnl_mkln
script:
a Log into the CACS as root and, in an XTerm window, enter
tcsh
.
b Change to the
/rahome/bin
directory.
c Run the make link script by entering
tnl_mkln
.
d One at a time, reboot the bridge(s).
Especially for InnoVox 4000 bridges, it’s important to wait until a
bridge finishes booting before rebooting the next bridge.
10 If necessary, restart the ReadiVoice application (see “Stopping and
Restarting ReadiVoice Processes” on page 111).
Table 5-3 Supported call flows on routed systems
Call Flow Options Translation Number Type
Traditional Shared Random
Two Password Private Fixed Translation Number
Traditional Shared +
Two Password Private
Fixed Translation Number with
3-digit code