Filter
Top Products
ReadiVoice Administration & Maintenance Guide
86 Proprietary & Confidential
Using the Channel State Monitor
In a PSTN system, you can use the Channel State Monitor tool to monitor the
teleconferencing bridge resources of the system (cards, spans, and channels)
and to enable or disable telephony spans.
To run Channel State Monitor:
1 In the navigation bar of the internal user home page, click Channel State
Monitor. If prompted, enter your system administration user name and
password.
The initial Channel State Monitor page appears (Figure 3-16).
2 Click the Display button (purple “D”) of the bridge for which you want
to see span and channel information.
The Java applet loads, which may take a few moments, and displays
summary status information for all the processor (VCE or HMod) cards in
the bridge (Figure 3-17). The cable icon in the lower-right corner shows the
state of the network connection between the CACS and the bridge; it
blinks if the connection is lost.
Figure 3-16 Channel State Monitor page, listing bridges in the system