Filter
Top Products
16 - 7
16 COMMUNICATIONS VIA NETWORK
16.2.4 Network configuration which MELSECNET/10(H), Ethernet, CC-Link, RS-422/485
were mixed
(1) When the MELSECNET/10(H) or Ethernet is defined as "Network" and CC-Link or
RS-422/485 is defined as "Link", combination of whether to be able to access from
the programming software (GX Developer, SW6RN-GSV
P, etc.) is shown
below.
Network communications
Usable/
unusable
Programming software CPU (C24) Network Link CPU
Programming software CPU (C24) Link Network CPU
Programming software Network Link CPU
Programming software Link Network CPU
Programming software CPU (C24) Network Link Network CPU
Programming software CPU (C24) Link Network Link CPU
Programming software Network Link Network CPU
Programming software Link Network Link CPU
: Usable : Unusable
(2) It can be accessed to 8 network points by setting the routing parameter in the
"Network".
(3) Because routing cannot access, it can access only the connected network. The
connected network can be selected by specifying the I/O No. of the module.