Filter
Top Products
12 - 7
12 USER FILES
12.3.2 Transfer of program
The outline operations to transfer the program from SW6RN-GSV P to the program
memory of Motion CPU are described.
(1) Program writing by the [Communication] menu - [Transfer]
(a) After transfer, programs are stored in the program memory of Motion CPU
stuffing to the front for every kind.
Program transfer
Program No.0
Motion CPU
Program memory
Free area
Program No.2
Program No.5
Program No.6
Program No.100
Personal computer
Programming software
Program No.0
Program No.2
Program No.5
Program No.6
Program No.100
(2) Program writing by the [Online change]
(a) After online change, a program to execute the online change is stored in the
free area after the program stored previously. (Refer to 1))
After that, the program written in previously is made invalid and the new
program is made valid. (Refer to 2))
Program No.0
Motion CPU Personal computer
Programming software
Program memory
Free area
1)
2)
Program No.2
Program No.5
Program No.6
Program No.100
Program No.5
Program No.0
Program No.2
Program No.5
Program No.6
Program No.100