Filter
Top Products
12 - 2
12 USER FILES
12.2 User File List
A user file list is shown below.
Project name folder
Folder of user-set "project name"
Sub folders (fixed)
Sfc
(1)
Project file
Project name.prj
( 1pc.)
(2)
Motion SFC chart file SFC program name.sfc
( 256 pcs.)
(3)
Motion SFC list file
(4)
Motion SFC code file
Glist
(5) G list file
g0000.bin to g4095.bin
Gcode
(6)
g0000.cod to g4095.cod
Flist
(7)
F/FS list file
f0000.bin to f4095.bin
Fcode
F/FS code file
f0000.cod to f4095.cod
(8)
(9a)
Motion SFC program conversion file(control code)
sfcprog.cod
(9b)
sfcprog.bin
(Note-2) : The above two files are always updated simultaneously.
(10) Motion SFC parameter file
sfcprm.bin
(11)
K code file
svprog.bin
(13)
PC type file
gsvp.cnf
(14)
svsystem.bin
svlatch.bin
svdata.bin
svedtda1.bin
(16)
svedtda2.bin
(Note-1) : 32-axes only svedtda3.bin
svedtda4.bin
(18)
svcamprm.bin
svcampr2.bin
svcampr3.bin
svcampr4.bin
(19)
Backup data file
svbackup.bin
temp
SV22
only
(20)
Motion register file
modevice.bin
Device memory file devmem.bin
(22)
PLC of the Q series
common parameter file
param.wpa
Information file of correspondence between Motion SFC program No. (0 to 255) and SFC program names (SFC files)
Motion SFC chart edit information and comment information file of one Motion SFC program
SFC program name.txt
( 256 pcs.)
Text file after conversion of Motion SFC chart of one Motion SFC program into list
SFC program name.cod
( 256 pcs.)
File after conversion of list file of one Motion SFC program into internal codes (including comment information)
G code file
LIst file of transition programs (G0 to G4095)
File after conversion of transition program(G0 to G4095) list file gn.bin(0 n 4095) into internal codes
List file of operation control programs (F/FS0 to F/FS4095) list file
File after conversion of operation control program(F/FS0 to F/FS4095) list file fn.bin(0 n 4095) into internal codes
Motion SFC program conversion file(text)
File where G list and F/FS list files are combined and converted into CPU's Motion SFC program text memory storage format
Motion SFC control parameter setting information files
CPU type information files
System setting data information files
Mechanical system program edit information files (page 1 to 8)
Mechanical system program edit information files (page 9 to 16)
Mechanical system program edit information files (page 17 to 24)
Mechanical system program edit information files (page 25 to 32)
System setting data file
High speed read setting file
Mechanical system
program editing file
Cam data conversion
file
(Note-1) : 32-axes only
(Note-1)
(Note-1)
(Note-1)
(Note-1)
(Note-1)
(Note-1)
Program editing temporary directory
File after conversion of mechanical system program edit
information file svedtdan.bin into internal codes
Cam data files of cam No.1 to 64
Cam data files of cam No.101 to 164
Cam data files of cam No.201 to 264
Cam data files of cam No.301 to 364
Information file 1 for backup and load
Information file 2 for backup and load
Motion register (#0 to #8191) reading file
Only user device range(#0 to #7999) is written.
Data files of Multiple CPU setting, I/O assignment etc.
File where SFC code, G-code and F/FS code files are combined and converted into CPU's Motion SFC program
code memory storage format
Devices (X,Y, M/L, B, F, D, W, Special relay, Special register) except # reading fil
e
(21)
Device setting screen
information file
devset.inf
Device setting information file of device setting screen
Internal code files of servo program (K0 to K4095) (file size is fixed length)
(17)
svmchprm.bin
Mechanical system
program conversion file
(12)
autono.inf
Automatic numbering
setting information file
Automatic numbering setting information files
High speed read setting information files
(15)
Servo data file
svls.bin
Servo parameter information files 2
Limit switch setting data information files
Communication
setting information file
communi.inf
Communication setting information files
(23)
Servo parameter information files 1
svdata2.bin
svbackup2.bin
svbackup6.bin
Information file 6 for backup and load
( ): Indicates the file(data) stored in CPU memory.
( )
( )
( )
( )
( )
( )
( )
( )