Filter
Top Products
7 - 52
7 OPERATION CONTROL PROGRAMS
F/FS G
7.9.3 Device output : DOUT
Format DOUT(D), (S) Number of basic steps 4
[Usable data]
Usable Data
Word device Constant
Setting
data
Bit device
16-bit
integer
type
32-bit
integer
type (L)
64-bit
floating
point
type (F)
Coasting
timer
16-bit
integer
type (K/H)
32-bit
integer type
(K/H, L)
64-bit
floating
point
type (K)
Calculation
expression
Bit
conditional
expression
Comparison
conditional
expression
(D)
— — — — — — — — — —
(S) —
—
—
— —
: Usable
(Note-1) : PX and special M cannot be used at (D).
(Note-2) : Range including M2000 to M2127 cannot be used at (D).
[Setting data]
Setting data Description Data type of result
(D) Output destination bit data
(S) Output source data
Batch bit
[Functions]
(1) The data specified with (S) is output to the bit data specified with (D).
(2) Specify a multiple of 16 as the device No. of the bit data specified with (D).
(3) If the type of (S) is a 16-bit integer type, 16 points of the (S) data, starting at the
least significant bit, are output in order to the bit devices headed by the one
specified with (D).
(4) If the type of (S) is a 32-bit integer type, 32 points of the (S) data, starting at the
least significant bit, are output in order to the bit devices headed by the one
specified with (D).
[Errors]
(1) An operation error will occur if:
• (D) or (S) is an indirectly specified device and its device No. is outside the
range.
• (D) is an indirectly specified device and its device No. is not a multiple of 16.
[Program examples]
(1) Program which outputs the data of D0 to Y0-YF
DOUT Y0, D0
D0
0 0 1 0 0 1 1 1 0 0 0 0 1 1 1 1
b0 b15
0 0 1 0 0 1 1 1 0 0 0 0 1 1 1 1
Y0YF