Filter
Top Products
Chapter 2. Host Software Component Functions 61
1st ed., 6/30/04 - 312579601
3. Make SLS.DBASE2 the new secondary control data set by issuing the
command:
4. Issue the command:
to view the current control data set status and assignments.
• HSC BACKup and HSC RESTore procedure:
1. Stop the host software on all hosts.
2. Backup the control data set with the HSC BACKup utility.
3. Restore the control data set with the HSC RESTore utility. This will clear the
control data set information in the Database Heartbeat record.
4. Start an HSC system, specifying the desired primary, secondary, and standby
control data sets in the CDSDEF PARMLIB statement. During HSC 2.0 or
higher initialization, the control data sets assigned as primary, secondary and
standby will be recorded in the Database Heartbeat record.
CDS ENABLE DSN=SLS.DBASE2
DISPLAY CDS