Filter
Top Products
204 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
ROW
optionally specifies that only certain rows within the specified LSM panel are to be
audited.
(row-list)
row-list may be a single row or a list of rows. Ranges are not allowed. If a list is
specified, the elements must be separated by blanks or commas, and the entire
list enclosed in parentheses.
If this parameter is specified, the LSM and PANel parameters may contain only
one element.
A row-list element is a one or two digit decimal number.
• For 4410 and 9310 LSMs, valid row entries are 0 through 14 (0 indicates
the top row and 14 indicates the bottom row).
• For 9360 (WolfCreek) LSMs, rows 0 through 41 can be specified with the
exception of panel 1, which contains only four usable cells (rows 35
through 38).
• For 9740 LSMs, valid row entries are 0 through 41 on panels 0, 2, and 3;
and 36 through 41 on panel 1.
• For SL8500 libraries, valid row entries are:
- 0-26 on a standard panel
- 0-12 on a short panel (panels 2-4, 6-7)
- 6-12 on a PTP panel (panel 5)
Notes:
1. On 9740s, column 3 on panel 2 allows row entries only on rows 28
through 41.
2. On 9740s, the cells on panel 3 are optional.
COLumn
optionally specifies that only certain columns (cells) within an LSM panel row are to
be audited.
(column-list)
column-list may be a single column, or a list of columns. Ranges are not
allowed. If a list is specified, the elements must be separated by blanks or
commas, and the entire list enclosed in parentheses.
If this parameter is specified, the LSM, PANel, and ROW parameters may
contain only one element.
A column-list element is a one or two digit decimal number.
Audit