Filter
Top Products
Chapter 3. HSC Control Statements and HSC Start Procedure 91
1st ed., 6/30/04 - 312579601
Fid
optionally, gtffid specifies a GTF format ID.
/PARM Fid(user-specified-format-id) parameter is valid for use in the HSC startup
SLKJCL file as an alternative method of specifying the GTF format ID.
HOSTID
optionally, host-id specifies the system ID associated with the request to process the
EXECParm control statement.
Note: If the hostid specified does not match the host executing the command, the
command is ignored and no message is issued.
Example
The following example illustrates the use of the EXECParm control statement.
EXECParm Control Statement - Command Prefix Off
EXECP MSGPRFX(NO) E(086) F(23) HOSTID(HSC1)
EXECParm