Filter
Top Products
308 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
(oldpswd)
specifies the 1-to 8-character old eject password. Note that oldpswd is not
displayed on SLSPRINT.
SET Freeze Panel
FREEZE
specifies to disallow (freeze) or allow (unfreeze) additional cartridges to be stored on|
a panel.
Notes: Frozen or unfrozen panels are recognized immediately by all active HSCs. It|
is not necessary to stop and reinitialize active HSCs to detect changes made by SET
FREEZE.
ON
specifies to freeze a panel, which prevents additional cartridges from being
moved to it. This restriction includes allocating new cartridge locations on a
panel as a result of
• a MOVe command, utility, or PGMI request
• cartridge entry into the ACS f
• float, scratch dismount, or scratch redistribution processing.
If a cartridge on a frozen panel is selected (e.g., through a mount request), it|
may be returned to its home cell on the frozen panel after fulfilling the request.
Cartridges already located on a frozen panel must be deliberately moved off
using the MOVe command, utility, or PGMI request, or cartridges can be
ejected by running the EJECt command or EJECt utility.
OFf
specifies to unfreeze a panel, which allows additional cartridges to be moved to
it.
Note: On a frozen panel, if a panel type is changed by running the Reconfiguration
utility, the new panel is not frozen. If the panel type did not change, the panel remains
frozen after a reconfiguration.
Set