StorageTek 6 Water System User Manual


 
584 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
26
(1A) CHARACTER 2 VOLHMCEL DECIMAL NUMBER OF THE
COLUMN WITHIN VOLHMROW
WHERE THE VOLUME RESIDES.
28
(1C) CHARACTER 3 VOLSPLBL VOLUME SUBPOOL LABEL
TYPE
‘SL’
(E2D3) CHAR CONST VOLSPSL STANDARD LABEL
‘NL’
(D5D3) CHAR CONST VOLSPNL NON-LABELLED
‘AL’
(C1D3) CHAR CONST VOLSPAL ANSI LABEL
‘NSL’
(D5E2D3) CHAR CONST VOLSPNSL NON-STANDARD LABEL
‘ ‘
(404040) CHAR CONST VOLSPNON ‘ SUBPOOL INFO NOT
REQUESTED OR NOT
AVA I L A B L E
31
(1F) CHARACTER 13 VOLSPID VOLUME SUBPOOL ID (13-BYTE
NAME OF POOL IF USING
SCRPOOL STATEMENTS; 3- BYTE
SUBPOOL INDEX NUMBER IF
USING SLSUX03)
44
(2C) SIGNED-HWORD 2 VOLMXCLN VOLUME MAXCLEAN VALUE
46
(2E) SIGNED-HWORD 2 -RESERVED- * RESERVED *
48
(30) SIGNED-FWORD 4 -RESERVED-(2) * RESERVED *
THE FOLLOWING FIELDS:
VOLTDINS, VOLTDSEL, VOLTDMNT
CONTAIN THE HIGH-ORDER FULLWORD OF THE CPU TOD CLOCK VALUE WHEN
THE VOLUME WAS (RESPECTIVELY) ENTERED INTO THE LIBRARY, LAST
SELECTED, AND LAST MOUNTED.
FOR EACH OF THESE FIELDS, THE LOW-ORDER BIT (BIT 31) HAS A
VALUE EQUAL TO 2-TO-THE-20TH-POWER MICROSECONDS, OR 1.048576
SECONDS SINCE MIDNIGHT, JANUARY 1, 1900. THIS TIME IS
UNCORRECTED FOR ANY LOCAL TIME ZONE OFFSET FROM GMT. THIS IS
THE SAME FORMAT WHICH IS USED BY THE HSC TO SAVE THIS
INFORMATION.
THE VALUES IN FIELDS: VOLDTINS, VOLTMINS, VOLDTSEL, VOLTMSEL, VOLDTMNT, VOLTMMNT
HAVE BEEN CORRECTED FOR LOCAL TIME OFFSET FROM GMT. THESE
TIMES (AND POSSIBLY THE DATES) MAY THEREFORE BE DIFFERENT
FROM VALUES CALCULATED USING THE TOD CONTENTS IN
VOLTDINS, VOLTDSEL, AND VOLTDMNT.
56
(38) SIGNED-FWORD 4 VOLTDINS TOD CLOCK VALUE WHEN
VOLUME WAS INSERTED INTO
THE LIBRARY
60
(3C) SIGNED-FWORD 4 VOLTDSEL TOD CLOCK VALUE WHEN
VOLUME WAS LAST SELECTED
64
(40) SIGNED-FWORD 4 VOLTDMNT TOD CLOCK VALUE WHEN
VOLUME WAS LAST
MOUNTEDD
Table 63. SLUVVDAT Record Format (Continued)
Dec Hex Type Length Label Description