Filter
Top Products
224 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
How to Restart Backup
After executing the BACKup utility, if a system failure or any other circumstance occurs
that causes a return code of eight (RC=8), the BACKup utility can be restarted as long as
criteria described in “Parameters” on page 214 for OPTion(Restart) is true.
Related Utilities
The RESTore utility complements the BACKup utility. If a restore is required, it should be
performed immediately after a CDS failure. Refer to “Restore Utility” on page 276 for
detailed information about the Restore utility.
Backup