Filter
Top Products
xxvi VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
The HSC mount/dismount component has been changed to allow any host to
mount or dismount a volume. Previously, only the mounting host could perform
mount/dismount operations.
System Programmer’s Guide
Chapter 2
The Volume Report utility displays mounted volumes in a volume report. System Programmer’s Guide
Chapter 4
The SLUVVDAT record format has been changed to include a new flag value for
the VOLFLAG2 field. Under “FOR ERRANT VOLUMES,” the following has
been added:
VOLERMNT EQU X’02’ VOLUME IS MOUNTED. Mounted volumes
now appear as “errant,” and the VOLERACT and VOLERMNT flags will be on.
System Programmer’s Guide
Appendix C
Support for the T9840C and T9940B ESCON-connect drives. Installation Guide
Chapter 6, SLIDRIVS macro
Chapter 12, External Media
Requirements
Operator’s Guide
Chapter 2
System Programmer’s Guide
Chapters 3 and 4, Appendix D
Message changes, additions and deletions. Messages and Codes Guide
Chapter 2
Enhancement/Modification
Publication(s)/
Primary Locations