Filter
Top Products
Chapter 3. HSC Control Statements and HSC Start Procedure 109
1st ed., 6/30/04 - 312579601
LMUADDR
identifies an LMU by IP address or host name for each ACS. To designate a single
LMU environment, specify one IP address or host name. To specify a dual LMU
environment, users can enter an additional IP address and/or host name.
Note: A maximum of two addresses can be specified.
Users can intermix host name and IP addresses in one LMUPATH control statement.
Each parameter entered must represent a different IP address.
lmu_hostname
defines a host name for the TCP/IP connection. The host name can be up to 24
characters long. The first character must be alphabetic.
Note: This option is not supported in VM.
nnn.nnn.nnn.nnn
defines an IP address for the LMU.
Example
The following example shows multiple LMUADDR parameters consisting of an IP
address and a hostname. In this case, the second parameter, LMU01, indicates a dual LMU
environment.
Note: The host name parameter shown in this example (LMU01) is not supported in VM.
LMUPATH ACS(00) LMUADDR(123.456.789.012,LMU01)
LMUPATH