Filter
Top Products
128 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
RECtech
optionally, specifies the method used to record data tracks on the tape surface for the
desired data set. You can enter a list of recording techniques, but they must be
separated by commas.
Notes:
1. A list specifies a generic pool from which a selection is made. There is no
implied priority.
2. The SL8500 library supports only the T9x40 (9840/T9840B/T9840C and
T9940A/T9940B) media types and recording techniques.
RECtech and MODel are mutually exclusive.
If this parameter is not specified on any matching TAPEREQ, a default is chosen
based on the value of the MEDia parameter on the first matching TAPEREQ. Table 6
shows default values used if RECtech is omitted.
To avoid problems, StorageTek recommends that all TAPEREQ statements specify
MEDia and RECtech consistently. Make sure to include either one or both parameters on
each statement.
If both media type and recording technique are omitted, all available devices are eligible
for allocation.
Valid recording techniques are:
LONGItud
indicates any device that uses longitudinal recording.
18track
indicates a 4480 transport.
36track
indicates a 4490, 9490, or 9490EE transport (any device that records in 36-track
mode).
Table 6. TAPEREQ RECtech Default Values
MEDia Entered: RECtech Default:
LONGItud LONGItud
Standard LONGItud
ECART 36track
ZCART 36Ctrack
DD3, DD3A, DD3B, DD3C DD3
STK1, STK1R STK1R
STK2, STK2P STK2P
TAPEREQ