Filter
Top Products
Chapter 4. Utility Functions 251
1st ed., 6/30/04 - 312579601
To execute the utility:
1. Delete the lines in the template that are not required, or leave the comment indicator
(*) in column one.
2. Remove the comment indicator from the desired lines.
3. Specify values for the desired parameters.
4. the parameters that are not desired.
5. Enter the command ‘‘FILE.’’
The job file is then submitted to the ACS service machine for execution.
JCL Example
The following example shows JCL for entering a cartridge(s) into a CAP. The volume(s) is
placed into scratch status.
JCL for Entering Cartridges in a CAP
Output Description
Output resulting from the execution of the Enter Cartridges utility includes:
• a listing of input commands with appropriate messages when syntax errors occur (see
Figure 14 on page 252)
• console messages informing the console operator when new volumes are entered
• messages associated with error conditions resulting from an unsuccessful attempt to
enter cartridges
• updated library control data set containing new volumes with the proper scratch
dispositions.
/JOB jobname SLUADMIN
/PARM MIXED
/FILE SLSPRINT DEV PRNT CLASS A
/FILE SLSIN *
ENTER CAP(01) SCRATCH
Enter Cartridges