Filter
Top Products
378 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
If the name is known, it will be located in storage. It will be brought into storage if it
was not there before.
If epname is not specified, the current traces are displayed.
offset
the optional offset from the address of epname at which to set a breakpoint using CP
PER. The default is 0.
.length
the optional length of the breakpoint. The default is 1.
Note: length must be preceded by a period with no space between offset and the
period.
An example of setting break-points follows:
ACS INIT (BREAK SLKDMOP 5E.1C