Filter
Top Products
Appendix A. Macros, Control Statements, Utilities, and Commands Syntax Reference 441
1st ed., 6/30/04 - 312579601
MEDia, RECtech, and MODel Parameters
Table 29 describes the HSC commands and control statements that accept MEDia,
MODel, and RECtech parameters.
Table 29. MEDia, RECtech, and MODel Cross-reference
Name Type
Related
Parameters
MEDia RECtech MODel Description
Display Drive Command DETail Yes Yes Yes Displays the transports that
are capable of the specified
MEDia, RECtech, or
MODel.
When DETail is supplied,
the MEDia and MODel are
displayed for all transports.
Display
SCRatch
Command acs-id, lsm-id,
SUBpool,
DETail
Yes Yes No Displays scratch counts that
match the MEDia and/or
RECtech. The scope of the
display may be limited to
MEDia and/or RECtech
scratch counts within a
subpool, ACS, or LSM.
When DETail is supplied, all
MEDia and RECtech
information is displayed
along with scratch counts.
Display
THReshld
Command acs-id, lsm-id,
SUBpool,
DETail
Yes
Yes
*
No Displays all scratch
thresholds that match the
MEDia and/or RECtech.
The scope of the display
may be limited to MEDia
and/or RECtech scratch
thresholds within a subpool,
ACS, or LSM.
When DETail is supplied, all
MEDia and RECtech
information is displayed
along with scratch
thresholds.
Display
Vo l u m e
Command DETail No No No Information on MEDia and
RECtech is provided when
the DETail parameter is
supplied.
EJect, EJECt Command
and Utility
SUBpool,
SCRTCH
Yes Yes No Ejects scratches that match
the MEDia and/or RECtech.
If a subpool is supplied,
those cartridges that match
MEDia and/or RECtech
within the subpool are
ejected.