Filter
Top Products
Chapter 4. Utility Functions 259
1st ed., 6/30/04 - 312579601
(row-list)
A one or two digit row number or list of row numbers. The maximum list
allowed is four rows. However, this parameter cannot contain a list if a list was
specified for the Column parameter. Ranges are not valid.
Column
list of Columns to be moved from. This parameter has a corequisite of the Row
parameter and is optional. If this parameter is not specified, all columns will be
moved for the rows specified.
(column-list)
A one or two digit column number or list of column numbers. This parameter
cannot contain a list if a list was specified for the Row parameter. Ranges are
not valid.
Note: Refer to the appropriate ACS hardware document for information about LSM panel,
row, and column locations and layouts.
Volume
volumes to be moved.
(vol-list)
A list of volumes (a maximum of 100 can be specified) or a range of volumes. If
you specify the Volume parameter, you may not specify the Flsm parameter.
TLsm
The target LSM(s). This is a required parameter. LSMs are specified as AA:LL,
where AA is the ACSid and LL is the LSMid. The ACSid:
• must be identical to the Flsm parameter ‘‘aa’’ (ACSid), or
• must be the same ACS in which the volume resides if the Volume
parameter is specified.
(lsm-list)
A list of LSMs (a maximum of 24 can be specified). Ranges are invalid. An
LSMid (lsm-id) is made up of the ACSid (hexadecimal 00-FF) and the LSM
number (hexadecimal 00-17) separated by a colon (:).
TPanel
the panel in the TLsm to move the cartridge(s) to. This parameter is optional.
(panel)
The one or two digit panel number. This parameter cannot contain a list or
range.
Move