Filter
Top Products
330 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
INCLude
optionally specifies the criteria for including volume information in the report. If this
keyword is specified, all volumes that match at least one of the specified criteria are
tentatively selected for the report. Information about volumes may be removed from
the list of volumes selected for the report if other options, such as EXCLUDE, VOL,
ACS, or LSM are specified.
Notes:
1. INCLude parameters are applied before EXCLude parameters in volume
selection.
2. Parameter values are not checked for the existence of their opposite values (for
example, ‘‘SEL’’ is still flagged even if ‘‘NONSEL’’ is specified, and vice
versa).
3. Positive attributes are applied before negative attributes (for example, SCR is
applied before NONSCR).
4. INCLude is not available if Volume Report is running under SCP.
*
indicates that all volumes in the library are considered for being included in the
report. The default is *. If more than one of the following parameters is
specified, the parameters must be separated by commas.
SCR
specifies that scratch volumes match the specified criteria.
NONSCR
specifies that nonscratch volumes match the specified criteria.
ERR
specifies that errant volumes match the criteria.
NONERR
specifies that non-errant volumes match the criteria.
SEL
specifies that selected volumes match the criteria.
NONSEL
specifies that nonselected volumes match the criteria.
READable
specifies that volumes with a readable external label match the criteria.
UNREADable
specifies that volumes with an unreadable external label match the criteria.
Volume Report