Filter
Top Products
186 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
Activities Report Utility
The Activities Report utility provides you with information to analyze library resource
loading by volume groups (for example, scratch compared to nonscratch, mounted,
dismounted, entered, and ejected). This report provides the information necessary for
analyzing and possibly redistributing library resources. You specify the time period to be
reported against.
The utility executes in the CMS environment using the SLUACTV exec.
SLUACTV EXEC
The SLUACTV EXEC is the means to execute the library Activities Report utility in the
CMS environment.
Note: In the CMS environment, this utility can report only on SMF data created by the
library when running in the StorageTek SCP environment.
The Performance Log Reblocker (SLUPERF) utility must be run prior to executing the
Activities Report utility. Parameters are passed to the utility in a control file (SLUACTV
PARMS). These parameters include:
• parameters (/PARM) to pass to the utilities driver
• the name and location of the library’s primary control data set
• the destination of the report output
• the names of files containing SMF data to be reported on
• the date/time range that is to be reported.
fname
the CMS filename of the control file. The file must be fixed-format, record length 80.
The default is SLUACTV.
type
the CMS filetype of the control file. The default is PARMS.
fmode
the CMS filemode of the control file. The default is A1.
The control file must be fixed-format, record length 80, and must contain the following
statements:
SLUACTV
SLUACTV
fname
PARMS
ftype
A1
fmode
Activities Report