Filter
Top Products
90 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
EXECParm Control Statement
The EXECParm control statement is an alternative method for specifying the GTF event
ID (Eid(gtfeid)) and GTF format ID (Fid(gtffid)). The EXECParm control statement also
provides a parameter that enables you to control display of the system command prefix
when messages are written to the operator at the system console. This parameter controls
the command prefix on WTO and WTOR messages.
Refer to “Creating an SLKJCL File for Starting the HSC” on page 157 for a description of
the start procedure and how it relates to EXECParm.
Syntax
Control Statement Name
EXECParm
initiates the control statement
Parameters
MSGPRFX
optionally, specifies control of whether the command prefix is to precede WTO or
WTOR messages to the operator.
Yes
indicates that the command prefix is to display preceding WTO or WTOR
messages to the operator.
No
indicates that the command prefix is not to display preceding WTO or WTOR
messages to the operator.
Eid
optionally, gtfeid specifies a GTF event ID.
/PARM Eid(user-specified-event-id) parameter is valid for use in the HSC startup
SLKJCL file as an alternative method of specifying the GTF event ID.
EXECParm
MSGPRFX( No
Yes
)
,Eid(gtfeid) ,Fid(gtffid)
,HOSTID(host-id)
EXECParm