Filter
Top Products
102 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
Example
The following is an example of using the Scratch Subpool control statement.
Other Methods of Controlling Scratch Subpools
There are other ways to control scratch volumes and scratch subpools in the library. The
following are additional methods that may be used:
• Display SCRatch command
• Display command with THReshld parameter
• ENter command specified with SCRatch parameter
• SCREdist utility with SUBpool and BALtol parameters
• EJect command with SCRTCH SUBpool parameters
• Mount command with SCRTCH SUBpool parameters
• Warn command with SCRatch SUBpool and THREShold parameters
• Tape management system (TMS) interface.
Refer to the HSC Operator’s Guide for more information.
SCRPO NAME(SITE1),RANGE(100000-200000,300000-400000),LABEL(SL)
SCRPO NAME(SITE2),RANGE(500000-540072),LABEL(NL),HOSTID(HSC1)
SCRPO NAME(SITE3),RANGE(540081-610094),LABEL(NSL)
SCRPO NAME(SITE4),RANGE(AP1000-AP1999),LABEL(SL),HOSTID(HSC1,HSC6)
SCRPOol