Filter
Top Products
202 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
Syntax
Utility Name
AUDIt
specifies that an audit operation is to be performed.
Parameters
ALL
specifies that the total library is to be audited.
APPly
(YES)
specifies that the Audit operation ejects cartridges with duplicate VOLSERs,
unreadable or illegal external media labels, and/or new cartridges unreadable
external labels, and performs corrective actions to the control data set to reflect
the physical contents of storage cells. YES is the default.
(NO)
specifies that a discrepancy listing is produced, and the control data set is not
updated.
ACS
specifies that only a particular ACS in the library is to be audited.
(acs-id)
The one or two digit hexadecimal ACS identifier.
Note: If the ACS parameter is specified with no LSM parameters, the audit is
performed on all LSMs in the ACS at the same time (multitasking). This is the same
as running the AUDIT utility with the ALL parameter. To audit only certain LSMs
within an ACS, you must code the LSM parameter with the LSM or list of LSMs.
AUDIt
Optional Parameters
Optional Parameters:
ACS(acs-id)
ALL
APPLy
(
NO
)
YES
LSM(lsm-list)
PANel(panel-list)
ROW(row-list)
COLumn(column-list)
CAP(cap-id)
DIAGScan(
)
ONLYEMPTYCel
ALSO
INTRANs
Audit