Filter
Top Products
Chapter 4. Utility Functions 275
1st ed., 6/30/04 - 312579601
16. XEDIT ACS SYSPROF B to remove the comments from the AUTOJOB statements.
Note: Make sure that the AUTOJOB file name matches the new startup job file
created earlier.
Modify the SLSCNTL, SLSCNTL2, and SLSSTBY data set names to match the new
names.
17. Save ACS SYSPROF on the RUN-disk (B).
18. Issue the following command to restart the ACS service machine:
AUTOLOG STKACS
19. Change any startup files (SYSPROF, STARTUP JCL, and/or PROCs) for other hosts
to reflect the new configuration.
Notes: The MDISK links for other hosts may also need to be changed depending on
your configuration.
20. From MAINTSTK, back up the new control data set by issuing the following
command:
EXEC ACS UTIL BACKUP
21. Audit any panels that changed while reconfiguring the library.
Caution: When an LSM panel is replaced, the contents of the original panel are
not retained in the CDS. The entire new panel must be audited to update the
CDS.
22. When the reconfiguration completes successfully, issue on MAINTSTK:
ERASE ACSOLD SYSPROF A
Reconfiguration