Filter
Top Products
50
GETTING STARTED CHP. 4
Playing a file
After you open a file, you can play it by clicking the Play All button ( ) on the transport bar. For more
information, see Transport bar on page 30.
Viewing the current position
As a file plays, Sound Forge indicates the current playback position in the data window in three ways:
• A cursor travels across the visible portion of the data window.
• The current playback position in relation to the entire file appears in the overview bar.
• The first selection status box in the playbar displays the current position in the user-specified format. For
more information, see Selecting status formats on page 64.
Playing a file from a specified point
Sound Forge also allows you to begin playback from any point in a file.
1.
Click to position the cursor in the data window. A flashing cursor (spanning the height of the waveform
display) displays.
2.
Click the Play button ( ) on the transport bar. The file plays from the cursor position.
If you do not hear playback, you may have inadvertently created a small selection. To determine if you
created a selection, examine the status boxes in the bottom-right corner of the data window.
• If only the first box contains a value, there is no selection.
• If all three boxes contain values, a selection has been created. Clear the selection by clicking anywhere
in the data window.
For more information, see Viewing selection status on page 51.
Status box value
Cursor position
Overview bar current position
Status boxes