Filter
Top Products
CHP. 15 LOOPING
227
Using the Crossfade Loop tool
1.
Open the Loop.pca file. A sustaining loop appears in the data window.
2.
From the Tools menu, choose Crossfade Loop. The Crossfade Loop dialog appears.
3.
Drag the Loop slider to configure the percentage of the loop to be crossfaded.
4.
If desired, select the Post-Loop check box and drag the slider to configure the percentage of the loop to be
crossfaded into the post-loop audio.
5.
From the Preview mode drop-down list, specify how the Preview button operates: Loop the Loop, Play Loop
through Post-Loop
, or Play as One Shot.
6.
Preview and tune the crossfade until you cannot detect the loop transitions.
7.
Click OK.
30% loop crossfade 80% loop crossfade
20% post-loop crossfade 90% post-loop crossfade