Filter
Top Products
CHP. 3 LEARNING THE SOUND FORGE WORKSPACE
43
5.
Position the tool near the bottom of the right channel and notice its appearance. The tool displays as .
This indicates that only audio data in the right channel will be selected.
Toggling channel selections
Once you place the cursor or create a selection in a stereo file, you can cycle through channel options (left,
right, both) by pressing .
Previewing channels
The single channel selection option allows you to preview channels in a stereo file individually.
1.
Open a stereo file and select all data.
2.
Click the Play Normal button ( ). The file plays in stereo.
3.
Press . The left channel is selected.
4.
Click the Play Normal button ( ). Only the mono left channel plays.
5.
Press . The right channel is selected.
6.
Click the Play Normal button ( ). Only the mono right channel plays.
Cursor selects only the
left channel
Cursor selects
both channels
Cursor selects only the
right channel
Tab
Tab
Tab